Alloy nickel Monel 401 pipe supplier, monel 401 in stock, produce monel 401

Short Description:

Monel 401 (UNS N04401 / W.Nr. 2.0842) is used primarily in specialized electrical and electronic applications. Monel 401 is readily autogenously welded by the gas-tungsten-arc process. Resistance welding is a very satisfactory method for joining the material. It also exhibits good brazing characteristics.

Send email to us

Product Detail

Product Tags

Applications

▪ Electronic and electrical devices
▪ Marine fixtures
▪ Chemical processing equipment
▪ Gasoline tanks
▪ Boiler feed water heaters
▪ Heat exchangers

Specifications

Trademark	GB	GOST	ASTM	UNS	DIN	W.Nr.	NF	BS
Monel 401Cuprothal 49 MWS-294 Constantan	CuNi44NC050	МНМц43-0.5Копель	Monel 401Alloy 294	N04401C72150	CuNi44Mn1	2.0842	–	–

Chemical Compositions of Monel 401 Nickel Alloy

Alloy	C	Si	Mn	P	S	Ni	Cu	Fe
Monel 401	≤0.10	≤0.25	≤2.25	≤0.020	≤0.015	40.0-45.0	Bal	≤0.75

Typical Physical and Mechanical Properties (RT, Annealed)

Density, g/cm3	Melting Point, ℃	Tensile Strength, MPa	Yield Strength, MPa	ELongation, %	Hardness, HRB
8.91	1280-1300	480	250	30	/

Product Forms and Standards

Rod, Bar, Wire and Forgings	ASTM B164/ASME SB164, DIN 17752-17754
Plate, Sheet and Strip	ASTM B127/ASME SB127, DIN 17750
Pipe and Tube	ASTM B163/ASME SB163, ASTM B725/ASME SB725, ASTM B775/ASME SB775, ASTM B751/ASME SB751, DIN17751
Welding Product	–
Others	ASTM B366/ASME SB366(Fittings), DIN 17743

Available Sizes And Specifications

Monel 401 available sizes and specifications
Grade	Monel 401
Nickel plate	Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil	Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil	Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe	Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe	Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar	Diameter: Ф4mm - Ф600mm
Nickel wire rod	Diameter：Ф0.01mm - Ф6mm